EGO Perks reset with multiple loadouts.

[Solar Zhou]

I have 3 loadouts and I've purchased both 'cloak' and 'overcharge'.

I've set my first loadout to use cloak and the other two to use overcharge. Those main powers work ok, there is no problem.

I'm also able to properly set different weapons for different loadouts and there are no issues there.

However, I cannot force the game to use different secondary perks for different loadouts. Each time I do that they randomly change.


For example, if I set 'Infiltrator' for loadout 1 and then for the same slot in loadout 2 I use 'Thick Skinned', next time I open the character sheet the first loadout will most likely have 'Thick Skinned' where it had 'Infiltrator' previously. But that's really random: sometimes 1 loadout reset, sometimes two of them, they reset to different perks (usually the ones I set last, but not always). After such perk asignment the icon seen on character sheet usually does not reflect what perk is really selected - when I try to edit it it shows that a different one is used and then when I close the edit screen the icon updates.
And so on, and so forth...

That means that for the time being I have to use all the same secondary perks for all of my loadouts. Which really sucks.

I'm using PC version and I play on European servers.

Please fix, thanks.

[Lurch87]

This is happening to me also. It seems that putting a different EGO power in a loadout messes up every other loadout. It also screws up perks and outfits. The only way to fix I have found is to make sure all your loadouts use the same EGO power.

[KetaOshi]

Have the same problem but I´ve found a way to do it. What you have to do is hit esc (back to the game) after you chose the first perk, then hit L and click on the next perk choose perk and hit esc... rinse and repeat.

I´ve noticed that lots of times you can only change gear/perks by clicking on the slot from loadout-tab. If you try to equip from the inventory-tab or ego-tab it´s a possibility for bugs. So to avoid frustration I always hit esc after each change and the L again for the next change.

[KetaOshi]

Have the same problem but I´ve found a way to do it. What you have to do is hit esc (back to the game) after you chose the first perk, then hit L and click on the next perk choose perk and hit esc... rinse and repeat.

I´ve noticed that lots of times you can only change gear/perks by clicking on the slot from loadout-tab. If you try to equip from the inventory-tab or ego-tab it´s a possibility for bugs. So to avoid frustration I always hit esc after each change and the L again for the next change.

Now when you are able to have different perks and gear in you loadout you are gonna start locking for the key to change loadouts fast... No luck??? If your keyboard/mouse can handle macros here is the way I do it:

I use a Logitech G700 mouse and made 2 macros. The first one changes loadouts upwards (1 to 6) and the second do it downwards (6 to 1) . I´ve put the macros on my sidescroll (middlemouse left&right).

Loadout up:[L(80ms)L]+[300ms]+[W(80ms)W]+[300ms]+[W(80ms)W]+[300ms]+[W(80ms)W]+[300ms]+[D(80ms)D]+[300ms]+[L(80ms)L]

Loadout down: [L(80ms)L]+[300ms]+[W(80ms)W]+[300ms]+[W(80ms)W]+[300ms]+[W(80ms)W]+[300ms]+[A(80ms)A]+[300ms]+[L(80ms)L]

Explanation: [L(80ms)L]= [push L button for( 80ms ) then release L button]
(((my macroeditor show this as [(down arrow L) (smiley 80ms) up arrow L)])))

[300ms]= [wait 300ms then:]
(((my macroeditor show this as [Smiley300ms])))

What the macros really does is open up the loadout-menu (L), then go up in the menu using W (up)(first time to co-op tab and the second time to loadout-tab) then A or D (left or right depending on macro) and finally L button to get back in game.

Note: In the macro I had to put in an extra W-keystroke. Because when you hit L your "startpoint" in the menu are gonna be either the first or second weapon slot (depends on where the weapon you use is slotted) and everytime I was using second weapon the macro didn´t work. Since pushing W an extra time don´t screw with the macro the easiest fix was adding a extra W keystroke in the macro.